Forgot login?   Register

Beta LaserMike LaserSpeed Non-Contact Gauge Measures Length & Speed with Highest Accuracy and Delivers Production Savings to Converters

Jay Luis
Marketing Manager
NDC Technologies
8001 Technology Blvd.
Dayton, OH 45424

Dayton, OH – September 9, 2016 –NDC Technologies, a leading global provider of precision measurement and control solutions, will give IWCS attendees an inside look at the Beta LaserMike LayScan lay length measurement system at this year’s conference.

LayScan is used by the industry’s leading cable manufacturers to accurately and consistently measure the lay length of twisted pairs in data communication cables up to Category 8 products. It eliminates scrap, costly rework and productivity losses due to manual, time-consuming lay length measurement methods and crosstalk performance issues from lay variations. LayScan can be used to measure the four pairs at the cabler or to measure an individual pair at a twinner to confirm the accuracy of twisted-pair cable construction during production. A data acquisition and control system effectively collects and processes each lay length in the cable and allows the full use of the customer’s off-line analysis tools such as trend charts, statistical analysis or FFT analysis to readily observe, measure and report systematic lay variations within each lay. Data can be easily stored on a local PC. LayScan measures lay lengths up to 25.4 mm at throughput speeds up to 152.4 m/min with a measurement accuracy to within 0.025 mm on the same twisted pair.

NDC will also be displaying its Beta LaserMike SRL Pro structural return loss measurement system. SRL Pro can be used in conjunction with LayScan for a total on-line cable performance quality solution. SRL Pro can be used before and/or after the extruder to identify potential causes of structural return loss problems on data communication cables.