Esqueceu o login?   Registro

NDC Technologies Presents the Latest Measurement and Control Solutions at IWCS

Contact:
jay.luis@betalasermike.com
Jay Luis
Marketing Manager
Beta LaserMike Inc.
8001 Technology Blvd.
Dayton, OH 45424
937-233-9935

Dayton, Ohio–August 19, 2015 – NDC Technologies, a leading global provider of precision measurement and control solutions, will be presenting its broad range of Beta LaserMike in-process and off-line dimensional monitoring systems for wire and cable at the upcoming IWCS conference (Booth 109). NDC will present the new AccuScan 6012 four-axis diameter and ovality gauge, latest LayScan lay length measurement system and most recent DCM ES-2G four-pair LAN/Data cable testing system.

The new 4-axis AccuScan 6012 gauge provides the most comprehensive measurement coverage around the product’s circumference to instantly detect changes in product diameter. It performs ultra-fast diameter and ovality measurements at 9600 scans per second on products up to 12 mm, and offers the highest single-scan accuracy in the industry with single-scan repeatability down to 1 micron. AccuScan 6012 also improves ovality accuracy up to 100% and provides the highest flaw detection accuracy with 25% improvement over 3-axis measurement methods.

The latest version LayScan accurately and consistently measures the lay length of twisted pairs in data communication cables, such as Cat 5e/6/6a/7a products. It solves scrap, costly rework and productivity loss problems due to manual, time-consuming lay length measurement methods and crosstalk performance issues from lay variations. LayScan can be used to measure the four pairs at the cabler or to measure an individual pair at a twinner to confirm the accuracy of twisted-pair cable construction during production. A data acquisition and control system effectively collects and processes each lay length and enables you to use off-line analysis tools such as trend charts, statistical analysis or FFT analysis to readily observe, measure and report systematic lay variations. LayScan measures lay lengths up to 25.4 mm at throughput speeds up to 152.4 m/min with a measurement accuracy to within 1 mil on the same twisted pair. The Beta LaserMike SRL Pro structural return loss measurement system can also be used for a total on-line cable performance quality solution. SRL Pro can be used before and/or after the extruder to identify potential causes of structural return loss problems on data communication cables.

The most recent DCM ES-2G testing platform extends the high-frequency measurement range to test Cat 5e/6/6a/7/7a cables now up to 2.2 GHz. This bench-top system is also optimized to test next-generation 40 Gb/s Cat 8 cables. The base unit includes automatic four-pair switching and the baluns needed to interface the cable under test to an external vector network analyzer for fast cable testing. Testing can be performed in less than 3 minutes. The DCM ES-2G cable testing system is also equipped with innovative technology that eliminates the effect of jacket removal on reflection measurements, such as input impedance and return loss. The heart of the system is the Windows®-based software engine that includes a simple-to-use test program with automatic comparison to the test specification, full test reporting and data management..